Changing Squeegee Blade on G70 Intelligent Floor Scrubber

1. Stop machine on a level surface. Turn off the machine.
2. Disconnect the vacuum hose from the squeegee assembly. Then loosen both squeegee assembly mounting knobs.
   

3. Pull the squeegee assembly from the machine.
4. Unscrew the wing nuts.

5. Remove the retaining band.

6. Remove the front squeegee blade and the rear squeegee blade.
 

7. Install the new squeegee blades or rotate the existing blades to the new edge. Be sure the holes in the squeegee blades are hooked onto the tabs on the blade clamp.
   

8. Reinstall the retaining band onto the squeegee assembly.

9. Tighten the wing nuts.

10. Reinstall the squeegee under the squeegee mount bracket and tighten two knobs. Then reinstall the vacuum hose to the squeegee assembly.